Nini Pryds - Section for Functional Oxides

Hybrid TEG-heat exchanger module for electrical power production

Sarhadi, Ali ; Bjørk, Rasmus ; Nielsen, Kaspar Kirstein ; Pryds, Nini
Presented at: 34th Annual International Conference on Thermoelectrics & 13th European Conference on Thermoelectrics

Type: Conference abstract for conference (Peer reviewed)

Status: Published | Year: 2015

Modeling constrained sintering of bi-layered tubular structures

Tadesse Molla, Tesfaye ; Kothanda Ramachandran, Dhavanesan ; Ni, De Wei ; Esposito, Vincenzo ; Teocoli, Francesca ; Olevsky, Eugene A. ; Bjørk, Rasmus ; Pryds, Nini ; Kaiser, Andreas ; Frandsen, Henrik Lund
in: Journal of the European Ceramic Society, vol: 35, issue: 3, pages: 941–950

Type: Journal article (Peer reviewed)

Status: Published | Year: 2015 | DOI: https://doi.org/10.1016/j.jeurceramsoc.2014.10.010

Modeling the Microstructural Evolution During Constrained Sintering

Bjørk, Rasmus ; Frandsen, Henrik Lund ; Pryds, Nini
in: Journal of the American Ceramic Society, vol: 98, issue: 11, pages: 3490–3495

Type: Journal article (Peer reviewed)

Status: Published | Year: 2015 | DOI: https://doi.org/10.1111/jace.13701

Morphology of Copper Tin Sulfide Films Grown by Pulsed Laser Deposition at 248 and 355 nm

Ettlinger, Rebecca Bolt ; Cazzaniga, Andrea Carlo ; Crovetto, Andrea ; Ravnkilde, Lasse ; Youngman, Tomas Hugh ; Canulescu, Stela ; Hansen, Ole ; Pryds, Nini ; Schou, Jørgen
Presented at: 13th Conference on Laser Ablation

Type: Poster (Peer reviewed)

Status: Published | Year: 2015

Optimization of spark plasma sintering conditions for antimony-doped bismuth telluride

Han, Li ; Van Nong, Ngo ; Le, Thanh Hung ; Pham, Hoang Ngan ; Hegelund Spangsdorf, Steeven ; Roch, Aljoscha ; Stepien, Lukas ; Pryds, Nini
part of: Book of Abstracts - 34th Annual International Conference on Thermoelectrics (ICT 2015) and 13th European conference on Thermoelectrics (ECT 2015), 2015
Presented at: 34th Annual International Conference on Thermoelectrics & 13th European Conference on Thermoelectrics

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published | Year: 2015

Optimization of the Mechanical and Electrical Performance of a Thermoelectric Module

Sarhadi, Ali ; Bjørk, Rasmus ; Pryds, Nini
in: Journal of Electronic Materials, vol: 44, issue: 11, pages: 4465-4472

Type: Journal article (Peer reviewed)

Status: Published | Year: 2015 | DOI: https://doi.org/10.1007/s11664-015-3977-0

Patterning of high mobility electron gases at complex oxide interfaces

Trier, Felix ; Prawiroatmodjo, G. E. D. K. ; von Soosten, Merlin ; Christensen, Dennis Valbjørn ; Jespersen, T. S. ; Chen, Yunzhong ; Pryds, Nini
in: Applied Physics Letters, vol: 107

Type: Journal article (Peer reviewed)

Status: Published | Year: 2015 | DOI: https://doi.org/10.1063/1.4935553

Percolative nature of A-site disordered La_0.75Ca_0.25-xSr_xMnO₃ manganites

Venkatesh, R. ; Yadam, Sankararao ; Venkateshwarlu, D. ; Samatham, S. Shanmukharao ; Pryds, Nini ; Bahl, Christian R.H.
in: Materials Chemistry and Physics, vol: 168, pages: 74-78

Type: Journal article (Peer reviewed)

Status: Published | Year: 2015 | DOI: https://doi.org/10.1016/j.matchemphys.2015.10.060

Pulsed laser deposition from ZnS and Cu₂SnS₃ multicomponent targets

Ettlinger, Rebecca Bolt ; Cazzaniga, Andrea Carlo ; Canulescu, Stela ; Pryds, Nini ; Schou, Jørgen
in: Applied Surface Science, vol: 336, pages: 385-390

Type: Journal article (Peer reviewed)

Status: Published | Year: 2015 | DOI: https://doi.org/10.1016/j.apsusc.2014.12.165

Segmentation of low‐cost high efficiency oxide‐based thermoelectric materials

Le, Thanh Hung ; Van Nong, Ngo ; Linderoth, Søren ; Pryds, Nini
in: Physica Status Solidi. A: Applications and Materials Science (Online), vol: 212, issue: 4, pages: 767-774

Type: Journal article (Peer reviewed)

Status: Published | Year: 2015 | DOI: https://doi.org/10.1002/pssa.201431626

Publikationer