All Fox publications

Publikationer rss feed

Sort:
Year
  • Peer reviewed
  • First author
  • Title
  • Year
ALL ARTICLE (387) DISSERTATION (4) BOOK (11) CONF (146) REPORT (2) MISC (2) PATENT (8) PEER REV (514)
2000
 

Crystallography and morphology of cementite precipitates formed during rapid solidification of a ferritic stainless steel

Huang, X. ; Pryds, Nini
in: Acta Materialia, vol: 48, issue: 16, pages: 4073-4082

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2000     |    DOI: https://doi.org/10.1016/S1359-6454(00)00205-6

 

Numerical modelling of the spray forming process: The effect of process parameters on the deposited material

Hattel, Jesper Henri ; Pryds, Nini ; Pedersen, Trine Bjerre ; Pedersen, Allan Schrøder
part of: Spray deposition and melt atomization. Proceedings, pages: 803-812, 2000, Bremen
Presented at: International Conference on Spray Deposition and Melt Atomization

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2000

 

On the Spray Forming Process: Numerical Modelling of Atomized and Compacted Metal

Hattel, Jesper ; Pryds, Nini ; Thorborg, Jesper ; Pedersen, Trine Bjerre
part of: Modeling of casting, welding and advanced solidification processes 9, pages: 167-174, 2000, Aachen
Presented at: 9th International Conference on Modeling of Casting, Welding and Advanced Solidification Processes

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2000

 

Preparation and properties of Mg-Cu-Y-Al bulk amorphous alloys

Pryds, Nini
Presented at: Meeting at Chalmers University

Type: Conference abstract for conference

Status: Published     |    Year: 2000

 

Preparation and Properties of Mg-Cu-Y-Al bulk Amorphous Alloys

Pryds, Nini ; Eldrup, Morten Mostgaard ; Ohnuma, M. ; Pedersen, Allan Schrøder ; Hattel, J. ; Linderoth, Søren
in: Materials Transactions, JIM, vol: 41, issue: 11, pages: 1435-1442

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2000

 

The effect of cooling rate on the microstructures formed during solidification of ferritic steel

Pryds, Nini ; Huang, X.
in: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol: 31, pages: 3155-3166

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2000

 

The effect of particles in different sizes on the mechanical properties of spray-formed steel composites

Petersen, K. ; Pedersen, Allan Schrøder ; Pryds, Nini ; Thorsen, K.Å. ; List, J.L.
part of: Spray deposition and melt atomization. Proceedings. Vol. 1, pages: 147-160, 2000, Bremen
Presented at: International Conference on Spray Deposition and Melt Atomization

Type: Article in proceedings

Status: Published     |    Year: 2000

 

The extraction of equilibrium solid/liquid transformation data from dynamic DSC measurements

Pedersen, Allan Schrøder ; Pryds, Nini ; Linderoth, Søren ; Larsen, P.H. ; Kjøller, J.
Presented at: 12th International Congress on Thermal Analysis and Calorimetry

Type: Conference abstract for conference

Status: Published     |    Year: 2000

1999
 

A quasi-stationary numerical model of atomized metal droplets. 1: Model formulation

Hattel, J.H. ; Pryds, Nini ; Thorborg, J. ; Ottosen, P.
in: Modelling and Simulation in Materials Science and Engineering, vol: 7, pages: 413-430

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 1999

 

A quasi-stationary numerical model of atomized metal droplets. 2: Prediction and assessment

Pryds, Nini ; Hattel, J.H. ; Thorborg, J.
in: Modelling and Simulation in Materials Science and Engineering, vol: 7, pages: 431-446

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 1999


Show 10